The People Closest To Ghost Immobiliser Install Share Some Big Secrets
Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for CAN buses. It's discreet, doesn't use LED indications or key fobs and is hidden within the vehicle's wiring.
The user can also disable the system temporarily using Transport Mode when renting out their car. This guide will take you through the installation process of an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car from key hacking attacks, cloning attacks and relay attacks. The system is directly connected to your vehicle's ECU and is protected by a unique PIN code that you choose. It is not detected by thieves using diagnostic scanners or other modern methods. It cannot be disabled with circuit cuts.
The system is easy to use, but professional installation is advised to ensure a perfect connection to the ECU of your vehicle. A Thatcham-approved installer can help with the installation and programming of your Ghost system. installing ghost immobiliser can also suggest a tracking or alarm system to complete the security package for your vehicle.
To avoid the accidental deployment of airbags or short circuits To avoid an accidental deployment of airbags or short circuits, the installer must remove your battery. When the battery is disconnected, the installer can safely begin working. Hand tools are essential for making precise connections, while a multimeter can be used to check electrical values and safety. Insulation tape and cable ties are also necessary for securing connections and keeping wiring neat. The user's manual offers specific instructions specific to the Ghost Immobiliser model you have.
During the installation, it is important to choose an area for grounding that is free of debris and paint. Installers should also ensure that the immobiliser's wires CAN H and can L are connected to the proper ECU ports. These wires can be plugged in or soldered, depending on the model. To ensure a secure and long-lasting connection, it is recommended that you use a high-quality plug.
Once the install is complete, the customer can activate the Transport Mode. This allows the vehicle to be utilized by valet parking companies or mechanics without needing to know the pin code. To do this, the customer has to press the service button on the dashboard 5 times in a matter of 2 seconds. After this is done the system will confirm by displaying 5 signals.
The Autowatch Ghost 2 is a highly efficient immobiliser that's TASSA certified and Thatcham approved. It's an excellent choice for anyone who frequently rents their vehicle through platforms such as Turo. Immobilisers can also lower insurance costs since it significantly decreases the risk of theft.
Getting Started
If you're looking for a solution that will safeguard your vehicle from theft, you can't go wrong with an autowatch ghost immobiliser. It prevents your car from starting even when someone copies or steals your key. This is due to its sophisticated technology, which is designed to stop the car's engine from starting unless the correct PIN code is entered.
The device is connected to the vehicle's bus system CAN which allows direct communication with the ECU. It uses buttons that are already present on the dashboard and steering wheel to create a unique sequence only you can identify, making it impossible for others to start your vehicle. This is the most secure way to safeguard your pride and joy. It will ensure that your car's value remains intact if you ever want to sell it.
Installing a Ghost immobiliser is easy however, you must follow the steps to avoid electrical issues and malfunctions of the system. You'll need to locate a power supply of 12V and a solid grounding on the chassis of your car. Then, you can begin to connect the wires that will be used to activate the immobiliser. Make use of high-quality connectors and soldering techniques to ensure an effective connection. Make sure to shield the connections with heat shrink tubing or insulation tape, or other materials to avoid short circuits of electricity.
Once the wires are connected, you can reconnect the battery and then turn on the engine to test the immobiliser's function. When everything is functioning correctly, you can install it in a secure place under the dash or elsewhere in the vehicle. Make sure to hide it in a secure manner to prevent any thief from taking advantage of it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) which means it is a high-quality deterrent for car thieves. It is resistant to hacking and key cloning and cannot be disabled without the code. It is also simple to use and can be set into the service valet mode to ensure that your automobile is not activated when you take it in for servicing or an MOT.
Wiring
The Ghost Immobiliser, a cutting modern security system, was designed to prevent vehicle theft. It connects directly to your vehicle's CAN bus and communicates with the ECU, making it virtually undetectable to your car. The Ghost Immobiliser does not interfere with your vehicle's factory settings unlike other aftermarket systems that require the removal of circuit elements.
It's also undetectable to thieves using diagnostic scanners. This is due to the fact that it doesn't send and receive radio frequency signals, and it utilizes the CAN data to communicate with your ECU. It doesn't require any modifications to your current key fobs.
Enter your sequence for disarming (either two or one button) and turn on the ignition of your vehicle to activate the Ghost Immobiliser. The indicator will flash twice to verify that you've entered the correct code. Once you've verified this, you're able to start your vehicle and drive off with peace of mind.
Once installed Once installed, the Ghost Immobiliser will protect your car from key cloning and hacking, while protecting the value of your most prized possession. If you have to surrender your vehicle to valet parking or for service The Ghost Immobiliser can be temporarily disabled in Transport Mode.
To complete the Ghost Immobiliser installation, you'll need to identify an energy source that is constant (12V) and a grounding point. Be sure that they are well-insulated and safe to touch. It's also recommended to use cable ties to tie and secure the wires. This reduces the risk of being tampered with by thieves. Make sure you verify the location of these points to avoid mistakes and mark them with the help of tape or a label. Examine all connections for signs that they're getting worn out. Loose connections can lead to system malfunctions, so be sure that they're firmly in place and securely insulated. Also, don't forget test the Ghost Immobiliser after installation is completed. This will ensure that the unit is operating properly, and that all connections are safe and well-insulated. Be sure to correct any problems immediately.
Testing
The Autowatch Ghost Immobiliser is an innovative vehicle security system that is integrated into your car's ECU to prevent the engine from starting without authorization. The innovative technology it uses protects your car from hacking, key cloning, and other methods that thieves employ to steal vehicles. The Ghost is a perfect complement to existing tracking and alarm systems to provide the most effective protection for your vehicle. The Ghost's unmatched features, paired with its discreet design makes it a preferred option for both drivers who love cars and security-conscious drivers.
It is crucial to follow the steps of installation to ensure a proper integration of Ghost Immobiliser. Consult the wiring diagram of the vehicle to help you locate and connect the wires. Then, you'll need to determine the power source and grounding points. Once you have located them, you'll need to mark the points to make them easily identifiable during installation. It is essential to use top-quality materials and tools. Basic hand tools can assist to make precise connections while a multimeter can check electrical values and ensure security. Cable tie and insulation tape will ensure that all connections are tidy. Finally, a user manual will give specific guidelines specifically tailored to your Ghost model.
Before beginning the installation it is important to test the system by entering the PIN code and starting the vehicle. This test will verify that the immobiliser works as intended and prevent unauthorised vehicle starts. This procedure should be carried out regularly as part your regular inspections of the vehicle to ensure the system is always working correctly.
After the installation is completed After the installation is completed, you are able to drive your vehicle with confidence. The Ghost will keep your precious possessions secure from thieves who might steal it and ensure that nobody is able to take off with your vehicle without the proper PIN code. The Ghost can be used in conjunction with an approved Thatcham tracker, which detects attempts at theft or tampering. This will allow you to locate your car if it's stolen.
The Ghost can be utilized on a wide range of vehicles and is compatible with all major manufacturers. If you are looking to secure your vehicle with this cutting-edge device, contact Monty's Locksmith today to learn more about our installation and service options. We are a TASSA Installer who is registered which guarantees that we follow strict guidelines and procedures for installing our products. This assures insurance companies, customers and law enforcement officials that all installations are performed safely and in a correct manner.